Tuesday, July 12, 2022

nose suspension

 Today I have spent some time on my central suspension, having previously made the sloping uprights and their brackets.





I made a sliding collar which will bear down on the main spring, once I know how much it should be compressed; it will then be fixed in place. The collar and spring will be housed in a tube which the collar has been made to fit. But I won't cut the tube until I know how much compression I need.

Next I need to make the steering block.


at

2 comments:

  1. Chad hedstromAugust 1, 2022 at 5:49 AM

    coming along nicely!

    ReplyDelete
  2. TinwormAugust 16, 2022 at 9:06 AM

    Thanks very much, Chad. Yours is the first comment ever on this blog. Do I know you by another name?

    ReplyDelete

Subscribe to: Post Comments (Atom)

A Doctor in the house

I am now a Doctor (PhD), so with that heavy burden of work out of the way, (and just as soon as the bathroom fitting, which I have been prom...

  • Been over a year
     So, it has been over a year since I did anything on this project. My dad is the only one who seems to have noticed, and it is the one proje...
  • front axle
     Today I made spacers in aluminium (which encircle the stub axles, fitting between the bearings), which stop the bearings sliding towards ea...
  • scuttle trim and fit
      A bit of restful R&R in the workshop today, after a late night finishing some writing for a meeting tomorrow. Trimmed and fitted my to...